Anti -corrosion treatment begin with the internal protection of hidden and inaccessible body elements. Each car has technological holes with which internal anti -corrosion processing is carried out. You can find them according to the attached scheme to the car or during visual inspection. Insert the tube (flexible hose) into the technological hole of the element to be processed. Its other end attach to the aerosol sprayer designed to process internal surfaces. Spraying is recommended to be done by turning the spray. Thus, treat the inner surface of the lid of the trunk, spaces, hood, doors and other hidden surfaces. Pay close attention to processing car thresholds. To prevent the flow of material during processing, close the output holes in the thresholds with plasticine or rubber plugs. Convenience in the work will provide an insolent with an island of a rubber tube to a steel flexible wire. At the end of the tube, make a small seal by wiping several layers of island — this is necessary to raise its tip for the most effective spraying. By connecting the pipe to the aerosol cylinder, start processing. Thus, slowly pulling a rubber hose from the hole, you spray the “anticorus” inside the threshold. Giving the material to dry, you can remove the plugs.
