Laying process. Only after preparing the surface, it is necessary to apply mastic and leve it with soaked water with a spatula. Mastic should be applied by only one tile, as it dries quickly. Using the level, it is necessary to level the tiles and tap it with a rubber clay for better adhesion to mastic. At the junction of two tiles, plastic crosses are installed and the surface of the tile is aligned again. In order not to deviate to the side, one side of the tile is pulled by the cord and subsequent tiles are laid in the same way. Loining seams. First you need to carefully remove the crosses. And only then the seams are filled with a wiping mixture with a spatula, and the remains are removed with a sponge. After it passes 15-20 minutes, the surface is cleaned and the seams will turn out even and smooth.
