Technology for carrying out painting. Before painting, you should clean the surface and put a spacing. The putty is applied to a pre-leafed surface with a spatula with small strokes with a thickness of 2-5 millimeters, while well aligned. After the putty has dried up, it is polished with a fine -grained or coarse -grained skin. When working with a brush, it is kept perpendicular to the wall. The paint is applied in one, and then spread over the surface in the other direction. If you use the roller, then it should first be lowered into a special bath, where the paint is located and squeezed on the net on the bath at an angle. During molar final work, the roller should be kept perpendicular to the surface. Each subsequent strip from the roller should cover the previous one 30-50 millimeters. If you need to paint a wall or ceiling, you should contact the company, although the cost of repair and final work will be much higher, but will be done at a professional level.
