You can lay linoleum in two ways: using or not using glue. Now we will consider the first option. It is necessary to immediately make a reservation that such a method should be used if you need to lay two or more pieces of linoleum in one room. First you need to lay out linoleum without gluing it — this is necessary so that it straightens after a long stay in the form of a roll. They put it so that about 6 centimeters are applied to the wall, as this will allow you to further measure its optimal value for this room. This process lasts a couple of days. In the future, it is necessary that the deck half -centimeter of linoleum does not reach the wall. We bend one half of a piece of linoleum, apply glue on it, and wait until it dries, that is, it must be ventilated. Next, put this part on the floor, with the help of any wide brush, squeeze out all the air from there until the material is completely glued. In the same way, you need to apply glue to the remaining part of the first piece and all other pieces of linoleum. The seams between pieces must be glued with a special liquid for cold welding of the seams. Previously, you need to apply a double -sided adhesive tape to the seams and cut it in the middle. This is necessary so that you can remove excess fluid subsequently.
