Before starting work on thermal insulation of walls or roof, it is necessary to carefully prepare the base. To do this, you need to remove dust, dirt, and the remaining oils from the surfaces. The surfaces are cleaned, after which you can proceed with the installation. Depending on the type of insulation used, installation is carried out in different ways. Mineral wool can be directly glued to the facade using special adhesive compounds. Basalt -based insulation, made in the form of plates, such as the valve of the batts or the Battts facade are attached to the walls with special fasteners of dowels that have the form of a fungus. After gluing, it can also be attached with dowels. The use of plastic dowels in this case give the design greater strength and reliability of fastening. If you do not use dowels, then the insulated surface can crack due to the relatively tangible weight of the material. It is especially important to use dowels when attaching the material to the ceiling.
